E27 6W RGB LED Bulb Light Lamp Color Change 2.4G Wireless Remote Control ( Item#: H9512 )

Features:
High performance RGB LED touch remote bulb, adopting the most advanced PWM control technology, there are 640,000 colors and 20 automatically changing modes for your choice.
It can memorize and restore the previous settings of color, brightness, and flashing patterns, easy to use.
Long service life and high luminous efficiency.
Stylish and exquisite appearance, easy to install.
Standard E27 lamp base, it is widely used in KTV, bar, bedroom, etc.
2.4G high frequency wireless remote control, low power consumption, long distance transmission, and strong anti‐interference ability, and high speed telecommunications, etc.
Unique heat dissipating design, ultra bright and environment-friendly, no UV and IR radiation.
CE and RoHS certified.

Specifications:
Item type: LED bulbs
Voltage: 86-265V 50/60HZ
Certification: CE,RoHS
Beam angle: 120 degrees
Average life: 50000 hrs
Occasion: Living room
Base type: E27
Led bulb type: Bubble ball bulb
LED power: 6W
Led quantity: 15pcs 5630 LED (R: 5pcs, G: 5pcs, B: 5pcs)
Power factor: above 0.65
Control distance: 20-30 meters
LED wavelength: R 620nm; G 510nm; B 460nm
Luminous flux (max): 180LM
Programs: 20 kinds
Remote powered by: 2 * AAA batteries(not included)
Remote working voltage: 3V
Remote radio frequency: 2400‐2483.5MHz
Modulation mode: GFSK
Emission power: 6db
Standby power consumption: 10uA
Material: Aluminum & PC(bulb) + ABS(remote)
Bulb size: 12.3 * 6cm / 4.8 * 2.4in (Height * Diameter)
Bulb weight: 119g / 4.2oz
Remote size: 11 * 5.2 * 2cm / 4.3 * 2.0 * 0.8in
Remote weight: 45g / 1.6oz
Package size: 13 * 9.7 * 6.5cm / 5.1 * 3.8 * 2.6in
Package weight: 211g / 7.4oz

Program list:

Programming (Code Matching and Code Clearing):
1. Code Matching:
For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb.
Please follow the below instructions:
Confirm correct connection between the bulb and the power. Switch off the power, then switch on again, and press key 5 once (within 3 seconds) the moment you see the light is on. The LED bulb blinks twice slowly when it is done.
2. Code Clearing:
The code can be cleared as needed. The kit (remote and bulb) will stay in the original state after code clearing. It can work when code rematch is done.
Please follow the below instructions:
Confirm correct connection between the bulb and the power. Switch off the power, then switch on again, and long press key 5(within 3 seconds) the moment you see the light is on. The LED bulb blinks nine times swiftly when it is done.

Package list:
1 * LED light bulb
1 * Remote control
1 * User manual