Features:
printing filaments such as PLA, TPU, PETG, ABS. Widely used in home decoration, toys, anime handicrafts, education, medical, etc.
▶ "Sprite" Direct Extruder: Our brand-new self-developed "Sprite" direct dual-gear extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of filaments without slipping. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning.
▶ CR Touch Automatic Bed Leveling Device: Self-developed CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Simple and easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hotbed. And the innovative PC coating printing platform brings good adhesion and printed models can easily be removed by bending the print sheet.
▶ LCD with Interactive UI: The 4.3-inch LCD enables click-to-control. It supports the switch among nine languages and will automatically dim out for energy-saving if there is no action for three minutes.
▶ Multifunction: Ender-3 S1 Plus features the function of detecting filament run out on breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament run out or breakage, it helps to avoid the waste of filaments and time caused by accidents.
1kg/2.2lbs filament, 1.75mm diameter, suitable for most of 3D printers. (Tolerance: ±0.02mm)
Made of environmentally friendly PLA, non-toxic and odorless, biodegradable and safe for use.
Stronger toughness, good liquidity, row neatly and won't knot while using, convenient and enough for use.
Recommended printing temperature 190℃~210℃.
KINGROON PLA 3D Printer Filament Vacuumed Sealed with Desiccant.
Specification:
Model: Ender-3 S1 Plus
Molding Technology: FDM
Build Volume: 300x300x300mm
Machine Dimension: 557x535x655mm
Printing Speed: Maximum 100 mm/s
Printing Precision: 100mm±0.2mm
Layer Height: 0.1-0.4mm
Filament Diameter: 1.75 mm
Nozzle Quantity: 1
Nozzle Diameter: 0.4 mm
Nozzle Temperature: up to 260°C
Heat Bed Temperature: up to 100°C
Build Surface: Spring steel PC magnetic build plate
Extruder: "Sprite" dual-gear direct extruder
Extrusion Force: 80N
Leveling Mode: Auto-leveling with CR-Touch
Display: 4.3" color touch screen
Mainboard: 32-bit silent mainboard
Resume Printing: Yes
Filament Sensor: Yes
Rated Voltage: 100-120V, 220-240V, 50/60Hz
Rated Power: 350W/24V
Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D
Data Transmission Method: Type-C USB/ TF Card
3D File Format: STL/OBJ/AMF
Supported Filament: PLA/ABS/TPU/PETG
Supported Language: Chinese, English, Spanish, German, French, Portuguese, Italian, Russian and Turkish
Product Name: PLA
Net weight: 1kg
Color: Black, White, Grey, Transparent, Skin color (Optional)
Filament: 1.75mm
Printer Temperature: 190~210℃
Hot Bed Temp: 80~120℃
Print Speed: 40-50mm/s
Water absorption: 0.5%
Tensile strength: ≥60Mpa
Flexural modulus: ≥60Mpa
Elongation at break: ≥3.0%
Packing List:
1 x Ender-3 S1 Plus Kit
1 x Filament Spool
XIAOMI 104-Key Wired Mechanical Keyboard JXJP01MW
Solar Lawn Spotlight Outdoor Patio Landscape Lawn Street Light Garden Villa Lighting Wall Lights(White and Warm white)
F-01 Microphone Wired to Wireless Xlr Transmitter and Receiver UHF Wireless Mic System for Audio Mixer Electric Guitar Bass
6.86in Touched Screen Car BT MP5 Player Wireless Carplay
SW023 Dafit Smart Watch 2-inch Full-screen Touch Health Monitoring Sleep Monitor Watch
