This simple DIY spot-welding machine has the characteristics of small size, and portable design. With 6 MOS tube to give you a better experience. It can be used after the correct connection with the power supplys, which is very convenient. Come on and try it, it will not let you down.
Features:
With 6 fine quality mos tube, the max.current can reach to 1800mAh, and the welding current is 100A~900A.
Support 0.1~0.3mm nickel sheet to sopt-welding, you can use it for the nickel sheet weldings of the lithium battery by yourself.
After connecting the power supplys in the correct way, you can turn it on and use it. After short pressing the capacity, magnification and gear buttons, select the corresponding function to perform welding. There are 6 gears of welding power to adjust.
With the high power and low power alarm functions, intelligent control, give you a better using experience.
The small capacity battery and direct current power supplys cannot be used as power supplys. Battery discharge capacity need >100A, you can use the high rate lithium-ion battery-pack or others which meet the conditions.
Specifications:
Material: printed circuit board
Working voltage: 6.5V~16V
Working current: <20mA
Standby power consumption: <0.5mA
Recommended using temperature: -10~60℃
Welding pe-ak current: 1800A
Welding mode: default automatic welding mode
Welding nickel sheet thickness: 0.1~0.3mm (Related to battery discharge energy)
Package size: 120 * 60 * 40mm / 4.7 * 2.4 * 1.6in
Package weight: 130g / 4.6ounce
Packing list:
1 * Intelligent Host
2 * Connecting Line
4 * Set Screw
2 * Spot-Welding Pen
1 * Nickel Sheet
2 * Heat-shrinkable Tubing