CNC 1419 Metal Engraving Cutting Machine Router Desktop DIY Milling Machine Aluminum Copper Wood PVC PCB Laser Machine ( Item#: E8210-1 )

This DIY laser CNC engraving machine is especial designed for DIY fun, study and research with professional GRBL control software, giving you extreme portable experience. 

Features:
This is an upgraded new engraving machine, compared to the old model, with an offline offline controller, can be sculpture in the offline state .
Made of aluminum and with red oxidation treatment, the all-metal fuselage is durable and good looking.
All axles of the machine are fixed by high precision flange bearings with straight-line electroplating, T8 screw rod with double nuts and the 304 stainless steel screws is non-oxidizing.
Three-axis stepper motors are all controlled by high precision stepper motors, equipped with double nuts and springs, so as to maximize the preferential accuracy.
Unique cooling system, laser module temperature will not exceed 25 degrees, engraving can work for a long time.
Widely used to soft metal (copper, aluminium), wood carving board, laser engraving, PCB, PVC, plastic, acrylic sculpture, etc.
The main two advantages of offline controller:
Don't need to connect computer. You can download the needed carving files into off-line controller .
Don't need to download any files. The off-line controller can control all actions, can directly do some simple curving, such as punching, curving rectangle shape and so on.

Specifications:
Laser Power: Without Laser/ 2500mw/ 5500mw (Optional)
Material: Aluminum alloy+Aluminum Profiles
Color: Red+Silver+Black
Working range: 190*140*40mm / 7.5*5.5*1.6in
Frame Size: 360*300*330mm/ 14*11.8*13in
Software: GRBL control
Spindle: 775 spindel (12-36 V) (24 V 7000r; 36 V 9000r)
Stepper Motor: 4-wire 2-phase stepper motor (1.3A 0.25N.m) Power Supply: 24 V 5-6A (110 V-240 V)
Support System: Windows XP/ Win 7/ Win 8/ Linux
Packing : Carton
Package Size: 44*25*18cm/ 17.3*9.8*7.1in
Package Weight: 9300g/ 328oz

Notice for use:
1. After adjusting the machine, open the engraving file to check where the zero point is, usually at the lower left corner, the same as the 2 test codes.
2. Locate the machine to the lower left corner of the workpiece first, then lower the cutter and the spindle must be turned on. Slow it down when the cutter is close to the workpiece, gently adjust it to the surface. 
3. Important! After lowering the cutter, click "XY zero " and "Z zero". Then you can click "start" to engrave. 
4. If DOOR alarm appears, please make sure to turn on the power switch on the motherboard . then please reconnect the motherboard.
Tips: It is better to run the machine without any workpiece first. Test it before you start formal engraving. 

Notes:
1. This machine is NOT assembled. You will receive all the parts in the package and you need to assemble it yourself.
2. Please note MDF is not equal to normal wood, as it doesn’t have a worldwide standard, so you need to test how deep the laser can cut.
3. Please wear laser goggles during using and avoid touching the laser directly with your eyes and skin.
4.The shipping package contains CD, you can  get laser engraving tutorial, CNC tutorial ,user guide, software download link, etc. from CD.
5.Offline controller is included in package.

Package List:(DIY Kit, Need To Assemble By Yourself.)
Model 1: Without Laser
1 * DIY CNC Engraving Machine Kit 

Model 2: 500mw
1 * Complete Set of Parts and Installation Tools
1 * Spindle ER11 (Has been Installed)
2 * Aluminum Substrate Milling Cutter
1 * 500mw Laser Module
1 * Goggles

Model 3: 2500mw
1 * Complete Set of Parts and Installation Tools
1 * Spindle ER11 (Has been Installed)
2 * Aluminum Substrate Milling Cutter
1 * 2500mw Laser Module
1 * Goggles

Model 4: 5500mw
1 * Complete Set of Parts and Installation Tools
1 * Spindle ER11 (Has been Installed)
2 * Aluminum Substrate Milling Cutter
1 * 5500mw Laser Module
1 * Goggles