Handheld DIY Spot Welding Tool Mini Size Lithium Battery Welding Machine for 18650/32650 Battery ( Item#: E10746 )

This is a kind of fine quality DIY spot welding machine, which is equipped with a 3.7-4.2V 4.5ah power lithium battery, with a discharge rate of 100C and a load capacity of about 400A. Output through the MOS tube, and the energy will be concentrated at the end of the welding pen, and it will be heated by short circuit to fuse the nickel sheet firmly with the battery. Self-carried with a charging control module, which charges the battery through the USB port. Equipped with charging indicating lamp, red while charging and green for fully charged. You can have a try.

Features:
Equipped with a 3.7-4.2V 4.5ah power lithium battery, with a discharge rate of 100C and a load capacity of about 400A.
Output through the MOS tube, and the energy will be concentrated at the end of the welding pen, and it will be heated by short circuit to fuse the nickel sheet firmly with the battery.
All this will be happened in milli seconds, simple and quickly.
It is precisely controlled by the single-chip microcomputer program without trigger the switch.
Free your hands or foot pedals completely.
Self-carried with a charging control module, which charges the battery through the USB port.
And it can welding hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.15mm if fully charged.
Equipped with charging indicating lamp, red while charging and green for fully charged.

Specifications:
Name: Spot Welding Tool
Battery: 3.7V, 4500mAh (included)
Item size: 124 * 80 * 18mm / 4.72 * 3.15 * 0.71in
Item weight: 250g / 8.82ounce
Package size: 200 * 150 * 50mm / 7.87 * 5.91 * 1.97in
Package weight: 300g / 10.58ounce

Packing List:
1 * Spot Welding Tool
1 * Battery
1 * Circuit Board
2 * Copper Welding Pen
1 * Buzzer
2 * Screw
2 * Insulated Heat Shrinkable Tube
1 * USB Charging Cable
1 * Nickel Sheet