The screen size of the spectrum analyzer has been upgraded to a 4-inch, clear-definition screen for easier access and use. This spectrum analyzer is designed to operate in the 0.1-800MHz wide ranges. Support for Ultra-mode, which extends its ranges of application to 0.1MHz-6GHz. With 100k-800MHz sinewaves output, 800MHz-4.4GHz squarewaves output, and 4.4GHz-5.4GHz mixed signal output when it is not used as a spectrum analyzer.
Features:
The screen size has been upgraded to a 4-inch, clear-definition screen for easier access and use.
This spectrum analyzer is designed to operate in the 0.1-800MHz wide ranges.
Support for Ultra-mode, which extends its ranges of application to 0.1MHz-6GHz.
With 100k-800MHz sinewaves output, 800MHz-4.4GHz squarewaves output, and 4.4GHz-5.4GHz mixed signal output when it is not used as a spectrum analyzer.
Bandpass filters with the variable resolution are used for both ranges between 200Hz and 850kHz.
200Hz-850kHz RBW, RBW is down to 200Hz for the efficient splitting of neighboring signals for SSB two-tone intermodulation testing, and up to 850kHz RBW support for fast scanning.
Input step attenuator from 0dB to 31dB (not combined with LNA).
A built-in calibration signal generator that is used for automatic self-test and (low) input calibration.
It can be connected to a PC via USB to make it a PC-controlled spectrum analyzer or signal generator.
Built-in 3,000mAh rechargeable battery for at least 2 hours of use.
Maximum input level +10dBm (please note, exceeding this value will damage the unit).
A built-in 32GB memory card is available to save measurement data and screenshots.
Specifications:
Name: Spectrum Analyzer
Material: printed circuit board+metal
Battery: 1 * 400mAh built-in battery
(included)
Package size: 200 * 150 * 50mm / 7.87 * 5.91 * 1.97in
Package weight: 386g / 13.62ounce
Packing List:
1 * Host
1 * Type-C Cable
2 * ALSR100 SMA Cables
1 * SMA-SMA Connector
1 * Antenna with SMA Connector
1 * Lanyard and Plectrum
1 * 32GB Memory Card