TOOLTOP ET827 2in1 Oscilloscope Multimeter 40Mhz Bandwidth 200MSps Sampling Rate Handheld Oscilloscopes Innovative AI Waveform Preview for DIY and Electronic Test ( Item#: E23044 )

2in1 design, this product ingeniously integrates digital oscilloscope and multimeter functions into one machine. Equipped with LCD display, with 200MSps sampling rate and 80MHz bandwidth. Multiple measurement design, support measure direct current and alternating current voltage/current, resistance, capacitance, frequency, temperature, diode/duty ratio, triode, waveform, continuity test. 3 scanning modes design of Auto, Normal and Single. With a total of 100 sets of data and 50 waveforms can be saved.

Features:
2 In 1 Function: This product ingeniously integrates digital oscilloscope and multimeter functions into one machine， with concise appearance, lightweight and portable, easy to carry and with a comfortable hand feel.
Sampling Rate&Bandwidth: The oscilloscope has a real-time high-speed sampling rate of 200Msps, 40MHz analogue bandwidth, 6000 digital multimeter.
LCD Display: With 240*160 resolution, black screen with white backlight, with  accurate data, clear and intuitive display.
3 Scanning Modes: Rotary knob for switching oscillography with three types of waveform scanning mode, automatic mode, regular mode and single-time mode to satisfy with your demands.
Data&Waveform Storage Function: Equipped with save function for data and waveform in the measurement, with a total of 100 sets of data and 50 waveforms can be saved.
P-H Mode: The peakvalue hold mode will display the measured maximum value and minimum value.
Waveform Parameters Setting: Support adjust the scanning time base and triggering position, adjusts the vertical amplitude and waveform position, adjust the trigger level, gradient and mode, with cursors measurement function.
TRMS Measurement: Support measure the virtual value of waveform without taking into account the waveform parameter and distortion.
Relative Value(REL) Measurement: Can effectively eliminate the lead-resistance, distributed capacitance and interference signal.
Multiple Measurement Design: Support measure direct current and alternating current voltage/current, resistance, capacitance, frequency, temperature, diode/duty ratio, triode, waveform, continuity test.
Automatic and Manual Measurement: Automatic/manual switching for measuring ranges and display of measurement data and historic data on the same screen.
High Protections: Overload protections, and built-in 500mA/10A fuse, can provede dual protections of the instrument.
Automatic Shutdown: It will automatic shutdown after 15 minutes no operations. After the function of automatic close is initiated, a sleep symbols will be displayed less than 1 minute before the instrument gets into sleep mode.
Higher Reliability: No adjustment of potentiometer is required for panel calibration and internal storage calibration.

Specifications:
Name: 2in1 Oscilloscope Multimeter
Material: ABS
Battery: 3 * 1.5V AA battery (included)

General Parameter:
Display: LCD display
Display resolution: 240*160 dot-matrix graphics
Backlight:    constantly on
Input resistance: 10MΩ
Battery: 3 * AA5 batteries
Auto shutdown: 15 minutes or disabled
Operation height: 0-2000m
Use time: More than 8 hours
Storage capacity: 100 data, 50 waveform 
Use environment: 0°C~+40°C;<75%RH
Storage condition: -10°C to +60°C; <90%RH

Oscilloscope Parameter:
Analogue bandwidth: 40MHz
Maximum real-time sampling rate: 200Msps
Vertical resolution: 8 bits
Degree of nonlinearity: ±1 bit
Number of channels: 1
Input resistance: About 10MΩ    
Division: Vertical  6.0, horizontal 24.0
Ranges of vertical sensativity: 500mV/div ~ 200V/div
Ranges of time base: 12.5ns/div ~ 10s/div
Accuracy of vertical amplitude: ±(5%+ 0.2div)    
Accuracy of time base: ±(0.01% + 0.1div)
Automatic zeropoint reference: During direct current measurement
Scanning mode: Auto/normal/single 
Trigger level: ± 6 div (0.1div/step)
Selection of trigger gradient: Rising/descending edge
Adjustment of trigger position:    ±12 div (0.1div/step)
Automatic setting: Automatic setting of time base and vertical amplitude
Cursor measurement function: dV, dt, 1/dt (Frequency)    
Automatic measurement function: Vp-p, Vavg, Vrms
Auto measurement accuracy: ±(5%+ 0.2div)
Length of recording: 24.0div

Multimeter Parameter:
DCVoltage Measuring ranges/Resolution/Uncertainty
600.0mV    0.1mV  ±(1.0%rdg + 10dgt)
6.000V    1mV        ±(1.0%rdg + 10dgt)
60.00V    10mV   ±(1.0%rdg + 10dgt)
600.0V    100mV ±(1.0%rdg + 10dgt)    
1000V    1V        ±(1.5%rdg + 10dgt)

ACVoltage True virtual value Measuring ranges/Resolution/Uncertainty
600.0mV     0.1mV    50Hz~400Hz (1.5%rdg + 10dgt); 400Hz~1kHz (for reference only if it’s above 1kHz) (2.0%rdg + 10dgt)
6.000V    1mV            50Hz~400Hz (1.5%rdg + 10dgt); 400Hz~1kHz (for reference only if it’s above 1kHz) (2.0%rdg + 10dgt)
60.00V    10mV    50Hz~400Hz (1.5%rdg + 10dgt); 400Hz~1kHz (for reference only if it’s above 1kHz) (2.0%rdg + 10dgt)
600.0V    100mV    50Hz~400Hz (1.5%rdg + 10dgt); 400Hz~1kHz (for reference only if it’s above 1kHz) (2.0%rdg + 10dgt)
750V    1V            (2.0%rdg + 10dgt) （50Hz~400Hz）

DCCurrent Measuring ranges/Resolution/Uncertainty
60.00/500.0mA   10µA /100µA     (1.2%rdg + 10dgt)
6.000/10.00A       1mA /10mA     (1.2%rdg + 10dgt)

ACCurrent Measuring ranges/Resolution/Uncertainty
60.00/500.0mA   10µA /100µA     (1.5%rdg + 10dgt)

True Virtual Value Measuring ranges/Resolution/Uncertainty
6.000/10.00A    1mA /10mA    50Hz~1kHz (for reference only if it’s above 1kHz)

Resistance Measuring ranges/Resolution/Uncertainty
600.0    0.1 Ω     (1.2%rdg + 5dgt)
6.000k     1 Ω             (1.2%rdg + 5dgt)
60.00k    10 Ω     (1.2%rdg + 5dgt)
600.0k    100 Ω     (1.2%rdg + 5dgt)
6.000M    1k             (1.2%rdg + 5dgt)
60.00M    10k             (3.0%rdg + 10dgt)

Capacitance Measuring ranges/Resolution/Uncertainty
9.999nF    1pF            (3.0%rdg + 10dgt)
99.99nF    10pF    (3.0%rdg + 10dgt)
999.9nF    100pF      (3.0%rdg + 10dgt)
9.999μF    1nF            (3.0%rdg + 10dgt)
99.99μF    10nF    (3.0%rdg + 10dgt)
999.9μF    100nF      (3.0%rdg + 10dgt)
9.999mF    1μF            (10.0%rdg + 10dgt)
99.99mF    10μF    (10.0%rdg + 10dgt)

Temperature: 0℃～600℃ 0.1℃  (2.0%rdg + 2℃)
Triode: 1～1999, 1    
Frequency: 9.999Hz ~ 9.999MHz, 0.001Hz ~ 1kHz, (1.0%rdg + 5dgt), (the signal amplitude is no smaller than 1Vp-p, AC V or 20mA RMS, AC A)
Duty ratio: 0.01~99.99% (AC500mVp-p)
Diode test: Open circuit voltage is about 3.0V; the maximum test current is about 2mA
Continuity test:    Judgment of resistance: about 50 Ω 
Switching of automatic measuring ranges: Applicable to various measurement functions
Reminding of over load of measuring ranges: “O. L” (Over load)
Measurement speed: 2.5 times/second
Dynamic data window: After the main display is held, the actual measurement data is constantly refreshed. 
Specification of fuse: 500mA/250V; 10A/500V

Display size: 40 * 60mm / 1.57 * 2.36in
Item size: 83 * 160 * 32mm / 3.27 * 6.30 * 1.26in
Item weight: 210g / 7.41ounce
Package size: 190 * 140 * 45mm / 7.48 * 5.51 * 1.77in
Package weight: 411g / 14.50ounce

Packing List:
1 * 2in1 Oscilloscope Multimeter