Hantek 1008C 8 Channels Automotive Diagnosis Equipment Car Diagnostic Oscilloscope Automobile Diagnostic Programmable Signal Generator Automobile Special Oscilloscope 8CH 2.4MSa/s 100kHz ( Item#: E23412 )

Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus Diagnosis/Performer/Startup&Charge), USB 2.0 interface plug and play, and need no extra power supply, Support tablet PC, Support WIN10/ WIN8/WIN7 etc. Free software upgrading constantly, higher cost performance, Support USBXI, easy to operate. 8 isolated channels oscilloscope, 2.4MSa/s real time sampling rate, 10mV/div to 5V/div high input sensitivity and large input range, 100kHz high bandwidth, small size, easy to carry. Dynamic cursor tracking, waveform record and replay function.

Features:
8 channels automotive diagnosis oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus Detection/Actuator/Start and Charge, etc).
Video help function provides the video help of automobile testing which can watch online.
The diagnostic results support the generation of diagnostic reports, printing with one click, screenshots and many other methods to save the data.
Support waveform recording, can be long time recording waveform. It can simulate camshaft and crankshaft signal.
Transmit signals through USB 2.0 interface plug and play, and no need extra power supply.

Specifications:
Brand: Hantek
Model: 1008C 
Function: Test the Car Engine Ignition 
Analog Channel: 8
Bandwidth: 100kHz
Input Impedance: Resistance: 1MΩ
Input Sensitivity: 10mV/div to 5V/div 
Input Coupling: DC
Resolution: 12 bits
Memory Depth: 4K
Max Input: 400V (DC+AC Peak)
Sampling Rate: 2.4MSa/s
Material: Plastic
Item Size: Approx. 225 * 185 * 45mm / 8.9 * 7.3 * 1.8in
Item Weight: Approx. 623g / 22.0oz
Package Size: Approx. 27.5 * 23.5 * 10cm / 10.8 * 9.3 * 3.9in
Package Weight: Approx. 1660g / 58.5oz

General Oscilloscope
Model	Hantek1008C
Analog Channel	8
Input Impedance	Resistance: 1MΩ
Input Sensitivity	10mV/div to 5V/div
Input Coupling	DC
Resolution	12 bits
Memory Depth	4K
Max. Input	400V (DC+AC Peak)
Real-Time Sampling Rate	2.4MSa/s
Time Base Range	1ns/div to 20000s/div(1-2-5sequences)
Automotive Measurement Function	Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition; Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position; CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus; Performer: Petrol/Diesel; Starter and charging circuits
Time Base Precision	±50ppm
Trigger Source	CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8
Trigger Mode	Edge
X-Axis Input	CH1
Y-Axis Input	CH2
Voltage Measurement	Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measurement	Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursors Measurement	Horizontal ,Vertical, Track, Auto Measure Modes
Waveform Signal Process	+,- , x,÷, FFT, Invert
Voltage Range	10mV to 5V/div @ x 1 probe  100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1
Current Range	100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A)
FFT	Rectangular, Hanning, Hamming, Blackman Window
Math	Addition, subtraction, multiplication, division
Interface	USB 2.0(Full Speed)
Power	No need extra power supply
High pressure ignition probe	Only Hantek1008C
Programmable Signal Generator	Channel	8CH
	Output Level	LVTTL
	Frequency Range	0-250kHz

Note: Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.

Package List:
1 * Car Diagnostic Oscilloscope
1 * Auto High-Pressure Ignition Probe
8 * BNC to Crocodile Clip Test Line
1 * USB Power Line
1 * Storage Case
1 * Software CD with User Manual