3in1 Oscilloscope Multimeter Signal Generator 2.8 inch TFT Display Handheld Oscilloscope ( Item#: E24072 )

3in1 design, this product ingeniously integrates digital oscilloscope, multimeter and signal source functions into one machine. Equipped with 2.8inch large-size color TFT display. With 200Msps sampling rate and 80MHz bandwidth. 3 trigger modes design of automatic, single and regular. Multifunctional design, with relative value, data hold, self-calibration function, data storage function, 15W quick charging and etc. Suitable for electric occasions such as automobile maintenance and power maintenance.

Features:
3 In 1 Function: This product ingeniously integrates digital oscilloscope, multimeter and signal generator functions into one machine. 
Digital Oscilloscope Function: Dual channel oscilloscope function, with the real-time sampling rate of 200Msps and bandwidth of 80MHz. With complete trigger function (automatic, single, regular). The trigger slope support selects between Rising, Falling and Double. Set your own parameters such as time base and vertical amplitude during waveform measurement.
Multimeter Function: 6000 count auto ranges Ture RMS. Relative value measurement, effectively eliminating wire resistance, distributed capacitance or interference signals. Functions include AC/DCvoltage, AC/DCcurrent, resistance, capacitance, frequency, duty cycle diode, on/off testing. Automatic/manual ranges switching, displaying measurement data and historical data on the same screen. Data waveform hold function during measurement, can store 2000 sets of data, 200 waveforms.
Signal Generator Function: 3 kinds of signal waveforms of sinewave, squarewave, trianglewave can be measured. Frequency and amplitude can be set independently. 
Compact Size & Reliable Quality: Lightweight and portable, also can be used as a portable tool for on-site debugging. Adopts ABS anti-drop housing, anti-slip concave design, high elasticity keys, simple interface, easy operation.
2.8inch Digital TFT Display: 2.8inch color screen, high resolution display with backlight, with bright colors and high contrast, you can see the data clearly. The backlight brightness and the backlight time are adjustable.
High Accuracy: Infrared decoding design, quick response, accurate capture of highly sensitive response signal, fast and accurate measurement with small error.
Rich Features: Overload protection 500mA/10A double fuse, double protection instrument15 minutes no operation automatic shutdown function. Panel calibration, memory calibration factor without potentiometer adjustment, higher reliability.
Folding Bracket: Comes with back bracket, integrated folding, stable placement, free your hands, does not occupy too much space.
Wide Applications: Suitable for mcu debugging, car repairs, home appliance repairs, DIY electronic competition, power-supply debugging, inverter, etc.

Specifications:
Name: 3in1 Digital Oscilloscope
Material: ABS
Display: 320*240, 2.8 inches TFT color screen
Battery: 2 * built-in 2000mah rechargeable lithium battery (included)
Backlight: brightness adjustable; backlight time 30s-120s adjustable or off
Automatic shutoff time: 15-60min or off
Charging voltage: 5VDC, 3A
Usage environment: 0°C to 40°C; <75%RH
Storage condition: -10°C to +60°C; <90%RH
Item size: 100 * 210 * 40mm / 3.94 * 8.27 * 1.57in
Item weight: 480g / 1.06lb
Package size: 237 * 185 * 55mm / 9.33 * 7.28 * 2.17in
Package weight: 830g / 1.83lb

Oscilloscope:
Real-time sample rate: 200Msps
Analog Bandwidth: 80MHz
Input resistance: 1ΜΩ
Vertical resolution: 8 bits
Nonlinearity: ±1 bit
Channel quantity: 2
Input impedance: Approx. 1ΜΩ
Indexing: Vertical 4.0, Horizontal 6.0
Vertical sensitivity ranges: Input BNC at 10mV/div~10V/div
Time base ranges: 5ns/div ~50s/div, 1-2-5 steps
Verticalwave amplitude accuracy: ±(5%+ 0.2div)
Time base accuracy: ±(0.01%+ 0.1div)
Scan mode: Auto, Normal, Single
Trigger Level: ± 4 div (0.04 div per step)
Trigger slope selection: Rising, Falling, Double
Trigger position adjustment: ± 4 div (0.04 div per step)
Automatic settings: Automatic setting of time base and vertical amplitude
Cursor measurement function: ▽V, △T
Optional bandwidth limitation: 20MHz, typical
Voltage measurement parameters: Vp-p, Vp, Vmax, Vmin, Vavg, Vrms
Time measurement parameters: Freq, Period, +Width, -Width, +Duty, Duty
Automatic measurement accuracy: ±(5%+ 0.2div)
Record length: 6K maximum for single channel, 3K per channel for dual channel

Signal Source:
Waveform frequency:
Sinewave: 1Hz-5MHz
Squarewave: 10Hz-1MHz 
Trianglewave: 10Hz-1MHz
Waveform amplitude: 5Vpp, 3Vpp, 2Vpp, 1Vpp, 500mVpp, 200mVpp, 100mVpp, OVpp

Multimeter: 
DCvoltage: 600.0mV, 0.1mV; 6.000V, 1mV; 60.00V, 10mV; 600.0V, 100mV; 1000V, 1V (0.75.0%rdg +10dgt)
AC Voltage: 600.0mV, 0.1mV; 6.000V, 1mV; 60.00V, 10mV; 600.0V, 100mV; 750V, 1V
50Hz~400Hz(1%rdg +10dgt) 400Hz~1kHz (above 1kHz for reference only)(1.2%rdg +10dgt)
DCCurrent: 60.00/500.0mA, 10μΑ /100μΑ; 6.000/10.00A, 1mA/10mA(1.2%rdg +10dgt)
AC Current True RMS: 60.00/500.0mA, 10μΑ /100μΑ; 6.000/10.00A, 1mA/10mA(1.5%rdg +10dgt)50Hz~1kHz (above 1kHz for reference only)
Resistance: 600.0Ω, 0.1Ω; 6.000kΩ, 1Ω; 60.00kΩ, 10Ω; 600.0kΩ, 100Ω; 6.000ΜΩ, 1k(1.0%rdg+5dgt); 60.00ΜΩ, 10k(3.0%rdg + 5dgt)
Capacitance: 9.999nF, 1pF; 99.99nF, 10pF; 999.9nF, 100pF (2.0%rdg + 10dgt); 9.999μF, 1nF; 99.99uF, 10nF; 999.9uF, 100nF (3.0%rdg +10dgt) ; 9.999mF, 1μF; 99.99mF, 10μF (10.0%rdg +10dgt)
Frequency: 9.999Hz~9.999MHz, 0.001Hz~1kHz (1.0%rdg+5dgt) signal amplitude not less than1Vр-р
Duty cycle: 0.01~99.99% (AC 500mVp-p)
Diode testing: Open circuit voltage about 3.0 V, maximum test current about 2 mA
On-Off test: Judgment resistance: about 50Ω
Automatic ranges switching: Can be applied to each measurement function
Range overflow indication: "O. L" (Over load)
Multimeter measurement rate: 2.5 times/s
Dynamic data refresh: Dynamic refreshing of actual measurement data continues after the main display is held

Packing List:
1 * 3 in 1 Oscope Meter
2 * Test Cable
1 * Clip Wire
1 * USB Type-C Cable
1 * User Manual
1 * Cloth Bag