This is a car pressure washer, used as a matching accessories of pressure washers, for cleaning the car, floors, walls, etc. It can rinsed off those nasty dirt in your car very easily. Made of high quality brass, durable and solid, won't rust easily. You may like it.
It is used as a matching accessories of pressure washers, for cleaning the car, floors, walls, etc.
Can rinsed off those nasty dirts in your car very easily.
It can be directly connected with the gun on the pressure washer.
Made of high quality brass, durable and solid, won't rust easily.
The foam cannon bottle combines a high pressure water flow mixed with detergent and air to produce thick clinging foam.
Spray angle can also be adjusted according to need, it is very convenient to use.
Main materials: brass, nylon
#1 For Nilfisk Lavor Old Type
#2 For Lavor New Type
#3 For Nilfisk Gerni
#4 For Bosch Aquatak
#5 For Karcher K
#6 For Black&Decker
#7 1/4" Adapter (optional)
Rated pressure: 200BAR - 2900PSI
Allow pressure: 280BAR - 3200PSI
Internal thread: 1/4"
Maximum flow: 20L/min - 5.3USGpm
Highest temperature: 60℃ / 140℉
Item weight: approx. 75g / 2.65oz
Package weight: approx. 80g / 2.82oz
Item size: aprox. 10 * 2 * 2cm / 3.94 * 0.79 * 0.79in
Package size: 13 * 2 * 2cm / 5.12 * 0.79 * 0.79in
How to use:
1. Put PTFE tape on the brass tube (two threads), each thread needs 50cm PTFE tape.
2. Put the fitting / adapter with brass tube and suction tube on foam lance unit.
3. Fill fluid bottle with desired amount of shampoo.
4. Fill fluid bottle with water (for best results, use warm water, 20% shampoo + 80% water is suggested).
5. Shake the fluid bottle to mix the shampoo with water thoroughly.
6. Attach fluid bottle to foam lance unit.
7. Attach the fitting / adapter to pressure washer gun, and you can start playing with it.
Please kindly note that spray bottle is not included.
1 * Pressure Nozzle or Adapter