DIY WAVE2 2.4" Handheld Pocket-size Digital Oscilloscope Touch Screen Dual Channel Digital Storage Oscilloscope Kit ( Item#: E9059-1 )

WAVE2 is the latest 2-Channel portable oscilloscope on the market, catered to hobbyists, educational institutions and professionals in the field of electronics and mechatronics. Featuring a bright and easy-to-use color touch screen display with access to many features only advance oscilloscopes offer such as built-in function generator and X-Y plotting. With an optional battery, it is portable enough to be taken wherever the jobs that need to be done is. Its an exciting project for any DIY-er, or can be purchased fully assembled for those who are looking to start using it right away. It comes with everything you need out of the box, with a micro-USB cable and two high-quality BNC probes. Enjoy and start creating!

Features:
Latest 2-Channel portable oscilloscope on the market, catered to hobbyists.
2.4-inch color LCD with 320*240 touch displays parameters clearly.
0 – 200KHz bandwidth and 1MS / s Max. real-time sampling rate.
Vertical sensitivity is 5mV/DIV – 20V/DIV (using x1 probe), high accuracy, low noise.
Built-in function generator and X-Y plotting.
Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery.

Specification:
Type: 15801K (DIY Kit with Probe) / 15802K (DIY Kit without Probe) / 15801 (Assembled Kit) (Optional)
No. of Channels: 2
Bandwidth: 0 – 200KHz per channel
Sensitivity Range: 5mV/DIV – 20V/DIV (using x1 probe)
Maximum Input Voltage: 50Vpk (using x1 probe)
Maximum Real Time Sampling Rate: 1MS/s
Time Base Range: 10us/DIV – 500s/DIV
X-Y Display Feature: Yes
Function Generator Capability: Built-in 0 – 20KHz (sine) dual channel DDS function generator
Display Resolution: 320 x 240 Color display
Display Size: 2.4″
Touch Display Capability: Yes
Battery powered and portable (battery not included in DIY Kit)

Important Notes:
Before beginning to work on the WAVE2 DIY kit, please make sure you have all the tools ready and some soldering experience. Handle soldering iron and all components with care, and keep out of reach from children.

General:
2.4" 320x240 color display
Touch panel operation
Y-X mode available
Built-in 2-channel DDS function generator
Light weight and portable

Vertical:
Number of Channel: 2
Analog Bandwidth: DC – 200KHz
Sensitivity: 5mV/Div - 20V/Div (with x1 probe)
Sensitivity Error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm / 25pF
Maximum Input Voltage: 50Vpk
Coupling: DC, AC

Horizontal:
Max Real-time Sampling Rate: 1Msps (per channel)
Timebase: 10us/Div - 500s/Div
Record Length: 1024 points
Trigger
Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Position: 1/2 of buffer size
Trigger Source: Ch1, Ch2, External
Maximum External Trigger Voltage: 15V

Function Generator:
Number of channel: 2
Waveform Type: Sine, Square, Saw-tooth, Stair
Frequency Range: DC – 20KHz (Sine)
Amplitude Range: 0 – 3V (peak value)
Offset: 0V or +3.3V
Duty Cycle: 0 – 100%
Phase: -360 – 360 degree

Power Supply:
Powered on 3.7V Li-ion battery or USB
Current Consumption: ~300mA @ 3.7 – 5V
Internal battery charger
Automatic power off on battery
Battery running time: Appr. 3hrs (when fully charged)

Other Features:
Y-X display mode
On-screen measurement display
Save / recall up to 4 captures
Serial output of captured data
Serial Port Format: LVTTL, 115200bps, 8N1
Built-in 1KHz/3.3V test signa

Package List:
1 * WAVE2 Oscilloscope DIY kit
1 * 117 Board and 118 Board
2 * BNC x1/x10 Selectable Probes
1 * Assembly Guide (English)
1 * Quick Reference Guide (English)