Professional Drill Drive Pump --- Large flow, stable performance and high efficiency, easy installation.
Efficient Work --- Pumping speed is fast, can pump 20-30 L water per minute(depends on the rpm of drill).
Wide Compatible --- Install all the drill chucks, you can use the electric drill to get the pump, easy an convenient to use.
Household Small Water Pump --- Compact and light weight design, portable and easy to store.
Superior Quality --- Fine workmanship, plastic, durable and has a long service life.
1.To achieve optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
2.Be sure inlet hose ia airtight and as short as possible. Inlet hose should not exceed 9FT(2.75M)
3.Operate within 5~49℃（41~120°F) temperature range.
4.When pumping abrasive fluids or liquids with solids, using a strainer on the inlet line for longer service time.
5.It's recommended that the pump is mounted to a surface for security and ease of use.
6.Mount and start drill, observe whether the inlet pipe has a certain fluid that is sucked into the pump within 15-20 seconds.
If not, check that inlet tube is properly mounted to inlet pump. Do not run dry, if pump fails to prime, check if the hose is kinked or clogged.
1. Do not run pump in reverse.
2. Do not operate when standing in the water, do not let the power cord fall into the water, please always work on the dry ground.
Material: Engineering plastics
Pump height: 2.75m / 1.08in
Flow capacity: 1800 m3/h
Rotate speed: 1500rpm ， flow=15L/min , pump lift=1.5m (depends on the rpm of drill)
3000rpm， flow=30L/min, pump lift=3m
Item Size: 10.6*6.4*3.7cm / 4.2*2.5*1.5in
Item Weight: 193g / 6.83oz
Packing Size: 11*8*6.5cm / 4.3*3.1*2.6in
1 * Drill Pump
2 * Hose Clamps
2 * Hose Connectors (3/4")