Description:
The repeller can release ultrasonic signals to disturb animal's neuro-system which do no harms to human, thus can drive them away in a safe way. Automatically stops working to protect the vehicle battery when battery voltage drops below than 9.2V. Suitable for expelling common mice, moles, gophers, and voles, etc.
Features:
[Ultrasonic]Intense ultrasonic signal to scare the mice and more other rodents animals away from your car.
[Vibration Sensing]When the product detects the vibration of the car, it will automatically stop working. 5 minutes after parking, the product starts automatically and starts working again.
[40㎡ Effective Range]A large effective range can help you safely removes annoying rodents such as mice, moles, gophers, and voles.
[Low-voltage Alarm]When the power supply voltage is lower than 9.2V, the product will enter the alarm mode and emit an alarm sound of 1Hz, and the product doesn't work.
[Easy Installation]Easy to mount 2 wire under the hood to the vehicle battery to provide power to the device, when the initial power is turned on, the product will enter the self-check state.
Working mode:
When the power supply voltage is higher than 9.2v, the product enters the working mode.
1-15s, the red light flashes three times, and then the ultrasonic wave of 12k-25kHz is output, accompanied by the white LED light flashing.
16-30s, product standby.
31-50s, repeat the process of 1-15s.
51s-1min 10s, product standby.
1 minute 11 seconds - 1 minute 40 seconds, repeating the process of 1-15s.
After completing the above operation, stop for 1 minute. Then repeat the above actions twice, stopping for 3 minutes and 5 minutes respectively.
Specifications:
Color: Black
Material: ABS
Voltage: DC12V
Working Current: 40mA
Standby Current: 5mA
Frequency: 12kHz-25kHz
Induction mode: Vibration induction
Coverage area: 40㎡
Power Supply: Car Engine
Occasion: Car
Package Size: 80*50*110mm / 3.14*1.96*4.33inch
Package Weight: 104g / 0.22lb
Package List:
1 * Car Mice Repeller
Operation:
Starting self-check: when the initial power is turned on, the product will enter the self-check state. First, the red light blinks three times, then the white light blinks three times, and then the alarm goes off.
Note: Due to different lighting and shooting conditions, the picture color may has a little differences with actual product, please all to prevail in kind.