Features:
Excellent Anti-interference: Only 3ms for 12 channels synchronously, Strong anti-jumping DSSS&FHSS working synchronously to keep the excellent anti-interference performance.
Real-time Information: Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen display. Support engine extended voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX.
Multiple Alarm: Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended engine voltage alarm. DD sounds and words alarming display on the blacklight LCD screen to avoid ignorance when you are in noise environment.
Voltage Protection System: RadioLink AT10II has included a circuit which prevents damage if you plug it in the wrong way. Low consumption of battery, A 3s 1800mAh liPo battery can work more than 12 hours.
Suit Multiple Models: Support Radiolink's R9DS, R12DSM, R6DS, R6DSM,R12DS, receiver. Works with most racer quads on the market, suitable for FPV racing drone, helicopter, multirotor, car boat and more. Programmable Mix Control: Fully computerized mixer configuration for fine control over most basic model aircraft functions.
AT10II RC Transmitter Specifications:
Channels: 12ch
Mode: 2 (Left Throttle)
Frequency: 2.4GHz ISM Bands (2400MHz to 2483.5MHz)
Channel Bandswidth: 5.0 MHz
Spread Spectrum: DSSS&FHSS
Adjacent Channel rejection: 38dbm
Transmitter Power: <100mW (20dbm)
Operating Current: <90mA
Operating Voltage: 7.4~15.0V
4096 Section Precision
Screen: 3.5 inches 16 Colorful Screen, 320*480 pixels
Support Receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM
Size: 220*95*180mm
R12DS Receiver Specifications
Signal: SBUS, PWM
Channel: PWM 12 Channels, SBUS 12 Channels
Working Voltage: 4.8-10V
Working Current: 38-45mA (Input Voltage: 5V)
Size: 5*3.2*1.5cm
Weight: 20g
Package Information:
Package Size: 22.5*12.5*27cm
Package Weight: 1034g
General Box Package
Package List:
1* AT10II Transmitter
Mode 2
1* Radiolink R12DS Receiver
1* Radiolink PRM-01 Module
1* Changing Parts
1* Simple User Manual
1* Transmitter Lanyard