The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 50*36mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently.
Feature:
2oz copper, 4-layers & 1.6mm PCB
Built-in XT60 Socket
Light and durable for intensive usage
Quick & Easy Installation
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output LED indicators & Short circuit tolerant
Specifications:
General:
Input voltage range (3S-4S LiPo operation): 9-18V DC
Regulated outputs: 5V and 12V outputs
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for: RC Receivers, Flight controllers, OSD, and Servos
BEC Mode: Linear
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
Designed for: Video TX or FPV camera with linear regulator
BEC Mode: Linear
Suggested battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Board size: 50 * 36 * 1.6mm
Board weight: 7.5g
Connector: XT60
Package Information:
Package size: 8 * 6 * 0.5cm / 3.1 * 2.4 * 0.2in
Package weight: 14g / 0.5oz
Poly bag package
Package include:
1 * PDB Board
1 * XT60 Connector